Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

Focal

Integra

Naim Audio

Wyrestorm

Speakercraft

The Chord Company

Reloop HiFi

Ayre Acoustics

Roon Labs

Furman

Glorious

Sbooster

Kordz

English Electric

Melco

Her er du nå: Hjem   >   Wyrestorm   >   HDMI Extender   >   Alle varer   >  
104377 Wyrestorm HDBaseT 100m EDID (Kit) EX-1UTP-IR-100-EDID

Wyrestorm HDBaseT 100m EDID (Kit)

EX-1UTP-IR-100-EDID

Varenr: 104377
Tips en venn...
4 995,-
Antallet avviker fra kjøpsforpakning. Antall endres til nærmeste hele pakke.
Produktinfo
Produktinfo
   
  • EDID management is also included for the further aid communication between connected devices and allow custom settings to tailor the installation to the requirements of the devices connected.
       
  • For added flexibility, 1:2 HDMI splitting capabilities have been added to double your simultaneous outputs, allowing for extra display or projector connection.
       
  • Single cable solution for extension of full HD audio/ video, RS232, 2-Way IR and 10/100 Ethernet
       
  • Robust HDBaseT transmission technology far more stable and resistant to electrostatic interference than conventional HD distribution over UTP
       
  • HDMI v1.4 with full 3D compatibility - frame packing/sequential (Blu-Ray) and interlaced Stereoscopic (satellite/cable broadcasts)
       
  • Supports all high definition resolutions: 1080p, 1080i, 720p and screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
       
  • 4k x 2k Resolution applications supported
       
  • Fully supports 48bit Deep Colour
       
  • Uncompressed HD and multi-channel audio
       
  • Automatically adjusts feedback, equalisation and amplification
       
  • Supports constant HDCP to prevent screen drop-outs when operating devices
       
  • Control signals can be sent between source device and display via 2-way IR
       
  • 1080p up to 100m (328ft) range using Cat5e/6
       
  • UTP (including 3D applications) - control of source and display possible from either location
       
  • 10/100 BaseT Ethernet
       
  • Can be cascaded up to 7 times (700m / 2300ft)
       
  • HDCP compliant
       
  • 10.2Gbps bandwidth output capacity
       
  • RS232 compatible with open source drivers/protocols available for market leading third party control systems